CMD INFO (0x8A)

Code: 0x8A
Description: The module sends an information message. The module is fully operative.
Example:

	D-Len	Cmd	Param
S->M	0x02	0x8A	0x10	,,INFO TIMEOUT''

Note: When quit a error and while booting the module sends information messages too. (,,INFO BOOT'', ,,INFO NO ERROR'')

SRV image processing sensor
The SRV image processing sensor transmits the following information/error codes as spontaneous messages:

• ,,INFO BOOT''
• ,,INFO READY''
• ,,INFO TRIGGER''
• ,,INFO PROGRAM CHANGED''
• ,,INFO GUI CONNECTED''
• ,,INFO GUI DISCONNECTED''