Troubleshooting

An (,,ERROR MOTOR VOLTAGE LOW'') error has occurred.

1. Interpret and eliminate error (extended diagnostics are supported). Switch off power supply to motor => switch on power supply.
2. Acknowledge error with ,,CMD ACK''. The ,,MsgCount'' is incremented by 1.
3. ,,CMD ACK'' command confirmed. The ,,MsgCount'' is incremented by 1.
4. Information message ,,No other errors'' displayed.
   

	D-Len	Cmd	Data	State/MsgCount
S->M	0x02	0x88	0x74 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x??	0x30 0x02
M->S	0x01	0x8B	0x?? 0x?? 0x?? 0x?? 0x?? 0x??
S->M	0x03	0x8B	0x4F 0x4B 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x??	0x20 0x03
Impulse	0x03	0x8A	0x08 0x00 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x?? 0x??	0x20 0x03