COMP 790: Lab 4: Preemptive Multitasking

We recommend finishing Part A by Friday, February 28, 2020, 11:59 PM
We recommend finishing Part B by Friday, March 6, 2020, 11:59 PM
Completed lab due on Friday, March 20, 2020, 11:59 PM Friday, March 27, 2020, 11:59 PM


In this lab you will implement preemptive multitasking among multiple simultaneously active user-mode environments.

In part A you will add multiprocessor support to JOS, implement round-robin scheduling, and add basic environment management system calls (calls that create and destroy environments, and allocate/map memory).

In part B, you will implement a Unix-like fork(), which allows a user-mode environment to create copies of itself.

Finally, in part C you will add support for inter-process communication (IPC), allowing different user-mode environments to communicate and synchronize with each other explicitly. You will also add support for hardware clock interrupts and preemption.

Getting Started

Use Git to commit your Lab 3 source, fetch the latest version of the course repository, and then create a local branch called lab4 based on our lab4 branch, origin/lab4:

kermit% cd ~/COMP790/lab
kermit% git commit -am 'my solution to lab3'
Created commit 734fab7: my solution to lab3
 4 files changed, 42 insertions(+), 9 deletions(-)
kermit% git pull

Already up-to-date.
kermit% git checkout -b lab4 origin/lab4
Branch lab4 set up to track remote branch refs/remotes/origin/lab4.
Switched to a new branch "lab4"
kermit% git merge lab3
Merge made by recursive.
 kern/env.c |   42 +++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
Lab 4 contains a number of new source files, some of which you should browse before you start:
kern/cpu.h Kernel-private definitions for multiprocessor support
kern/mpconfig.c Code to read the multiprocessor configuration
kern/lapic.c Kernel code driving the local APIC unit in each processor
kern/mpentry.S Assembly-language entry code for non-boot CPUs
kern/spinlock.h Kernel-private definitions for spin locks, including the big kernel lock
kern/spinlock.c Kernel code implementing spin locks
kern/sched.c Code skeleton of the scheduler that you are about to implement

Lab Requirements

This lab is divided into three parts, A, B, and C.

In this and all other labs, you may complete challenge problems for extra credit. If you do this, please create entries in challenge4.txt, which includes a short (e.g., one or two paragraph) description of what you did to solve your chosen challenge problem and how to test it. If you implement more than one challenge problem, you must describe each one. Be sure to list the challenge problem number. If you complete challenges from previous labs, please list them in this file (not a previous lab challenge file), with both the lab and problem number.

When you are ready to hand in your lab code and write-up, note in slack.txt how many late hours you have used for this assignment. (This is to help us agree on the number that you have used.)

Part A: Multiprocessor Support and Cooperative Multitasking

In the first part of this lab, you will first extend JOS to run on a multiprocessor system, and then implement some new JOS kernel system calls to allow user-level environments to create additional new environments. You will also implement cooperative round-robin scheduling, allowing the kernel to switch from one environment to another when the current environment voluntarily relinquishes the CPU (or exits). Later in part C you will implement preemptive scheduling, which allows the kernel to re-take control of the CPU from an environment after a certain time has passed even if the environment does not cooperate.

Multiprocessor Support

We are going to make JOS support "symmetric multiprocessing" (SMP), a multiprocessor model in which all CPUs have equivalent access to system resources such as memory and I/O buses. While all CPUs are functionally identical in SMP, during the boot process they can be classified into two types: the bootstrap processor (BSP) is responsible for initializing the system and for booting the operating system; and the application processors (APs) are activated by the BSP only after the operating system is up and running. Which processor is the BSP is determined by the hardware and the BIOS. Up to this point, all your existing JOS code has been running on the BSP.

In an SMP system, each CPU has an accompanying local APIC (LAPIC) unit. The LAPIC units are responsible for delivering interrupts throughout the system. The LAPIC also provides its connected CPU with a unique identifier. In this lab, we make use of the following basic functionality of the LAPIC unit (in kern/lapic.c):

A processor accesses its LAPIC using memory-mapped I/O (MMIO). In MMIO, a portion of physical memory is hardwired to the registers of some I/O devices, so the same load/store instructions typically used to access memory can be used to access device registers. You've already seen one IO hole at physical address 0xA0000 (we use this to write to the CGA display buffer). The LAPIC lives in a hole starting at physical address 0xFE000000 (32MB short of 4GB), so it's too high for us to access using our usual direct map at KERNBASE. The JOS virtual memory map leaves a 4MB gap at MMIOBASE so we have a place to map devices like this. Since later labs introduce more MMIO regions, you'll write a simple function to allocate space from this region and map device memory to it.

Exercise 1. Implement mmio_map_region in kern/pmap.c. To see how this is used, look at the beginning of lapic_init in kern/lapic.c. You'll have to do the next exercise, too, before the tests for mmio_map_region will run.

Application Processor Bootstrap

Before booting up APs, the BSP should first collect information about the multiprocessor system, such as the total number of CPUs, their APIC IDs and the MMIO address of the LAPIC unit. The mp_init() function in kern/mpconfig.c retrieves this information by reading the MP configuration table that resides in the BIOS's region of memory.

The boot_aps() function (in kern/init.c) drives the AP bootstrap process. APs start in real mode, much like how the bootloader started in boot/boot.S, so boot_aps() copies the AP entry code (kern/mpentry.S) to a memory location that is addressable in the real mode. Unlike with the bootloader, we have some control over where the AP will start executing code; we copy the entry code to 0x7000 (MPENTRY_PADDR), but any unused, page-aligned physical address below 640KB would work.

After that, boot_aps() activates APs one after another, by sending STARTUP IPIs to the LAPIC unit of the corresponding AP, along with an initial CS:IP address at which the AP should start running its entry code (MPENTRY_PADDR in our case). The entry code in kern/mpentry.S is quite similar to that of boot/boot.S. After some brief setup, it puts the AP into protected mode with paging enabled, and then calls the C setup routine mp_main() (also in kern/init.c). boot_aps() waits for the AP to signal a CPU_STARTED flag in cpu_status field of its struct Cpu before going on to wake up the next one.

Exercise 2. Read boot_aps() and mp_main() in kern/init.c, and the assembly code in kern/mpentry.S. Make sure you understand the control flow transfer during the bootstrap of APs. Then modify your implementation of page_init() in kern/pmap.c to avoid adding the page at MPENTRY_PADDR to the free list, so that we can safely copy and run AP bootstrap code at that physical address. Your code should pass the updated page_check_free_list() test (but might fail the check_boot_pml4e() test, which you will fix soon).


  1. Compare kern/mpentry.S side by side with boot/boot.S. Bearing in mind that kern/mpentry.S is compiled and linked to run above KERNBASE just like everything else in the kernel, what is the purpose of macro MPBOOTPHYS? Why is it necessary in kern/mpentry.S but not in boot/boot.S? In other words, what could go wrong if it were omitted in kern/mpentry.S?
    Hint: recall the differences between the link address and the load address that we have discussed in Lab 1.

Per-CPU State and Initialization

When writing a multiprocessor OS, it is important to distinguish between per-CPU state that is private to each processor, and global state that the whole system shares. kern/cpu.h defines most of the per-CPU state, including struct Cpu, which stores per-CPU variables. cpunum() always returns the ID of the CPU that calls it, which can be used as an index into arrays like cpus. Alternatively, the macro thiscpu is shorthand for the current CPU's struct Cpu.

Here is the per-CPU state you should be aware of:

Exercise 3. Modify mem_init_mp() (in kern/pmap.c) to map per-CPU stacks starting at KSTACKTOP, as shown in inc/memlayout.h. The size of each stack is KSTKSIZE bytes plus KSTKGAP bytes of unmapped guard pages. Your code should pass the new check in check_boot_pml4e()().

Exercise 4. The code in trap_init_percpu() (kern/trap.c) initializes the TSS and TSS descriptor for the BSP. It worked in Lab 3, but is incorrect when running on other CPUs. Change the code so that it can work on all CPUs. (Note: your new code should not use the global ts variable any more.)

When you finish the above exercises, run JOS in QEMU with 4 CPUs using make qemu CPUS=4 (or make qemu-nox CPUS=4), you should see output like this:

Physical memory: 66556K available, base = 640K, extended = 65532K
check_page_alloc() succeeded!
check_page() succeeded!
check_boot_pml4e() succeeded!
SMP: CPU 0 found 4 CPU(s)
enabled interrupts: 1 2
SMP: CPU 1 starting
SMP: CPU 2 starting
SMP: CPU 3 starting

Note: You will probably also see assertions about illegally unlocking a lock that is not owned by any CPU. This error should be resolved after you complete Exercise 5.


Our current code spins after initializing the AP in mp_main(). Before letting the AP get any further, we need to first address race conditions when multiple CPUs run kernel code simultaneously. The simplest way to achieve this is to use a big kernel lock. The big kernel lock is a single global lock that is held whenever an environment enters kernel mode, and is released when the environment returns to user mode. In this model, environments in user mode can run concurrently on any available CPUs, but no more than one environment can run in kernel mode; any other environments that try to enter kernel mode are forced to wait.

kern/spinlock.h declares the big kernel lock, namely kernel_lock. It also provides lock_kernel() and unlock_kernel(), shortcuts to acquire and release the lock. You should apply the big kernel lock at four locations:

Exercise 5. Apply the big kernel lock as described above, by calling lock_kernel() and unlock_kernel() at the proper locations.

How to test if your locking is correct? You can't at this moment! But you will be able to after you implement the scheduler in the next exercise.


  1. It seems that using the big kernel lock guarantees that only one CPU can run the kernel code at a time. Why do we still need separate kernel stacks for each CPU? Describe a scenario in which using a shared kernel stack will go wrong, even with the protection of the big kernel lock.

Challenge 1! (up to 10 points, depending on how elegant and correct your fine-grained locking is) The big kernel lock is simple and easy to use. Nevertheless, it eliminates all concurrency in kernel mode. Most modern operating systems use different locks to protect different parts of their shared state, an approach called fine-grained locking. Fine-grained locking can increase performance significantly, but is more difficult to implement and error-prone. If you are brave enough, drop the big kernel lock and embrace concurrency in JOS!

It is up to you to decide the locking granularity (the amount of data that a lock protects). As a hint, you may consider using spin locks to ensure exclusive access to these shared components in the JOS kernel:

Round-Robin Scheduling

Your next task in this lab is to change the JOS kernel so that it can alternate between multiple environments in "round-robin" fashion. Round-robin scheduling in JOS works as follows:

Exercise 6. Implement round-robin scheduling in sched_yield() as described above. Don't forget to modify syscall() to dispatch sys_yield().

Modify kern/init.c to create two (or more!) environments that all run the program user/yield.c. You should see the environments switch back and forth between each other five times before terminating, like this:

Hello, I am environment 00001008.
Hello, I am environment 00001009.
Hello, I am environment 0000100a.
Back in environment 00001008, iteration 0.
Back in environment 00001009, iteration 0.
Back in environment 0000100a, iteration 0.
Back in environment 00001008, iteration 1.
Back in environment 00001009, iteration 1.
Back in environment 0000100a, iteration 1.

After the yield programs exit, when only idle environments are runnable, the scheduler should invoke the JOS kernel monitor. If all this does not happen, then fix your code before proceeding.


  1. In your implementation of env_run() you should have called lcr3(). Before and after the call to lcr3(), your code makes references (at least it should) to the variable e, the argument to env_run. Upon loading the %cr3 register, the addressing context used by the MMU is instantly changed. But a virtual address (namely e) has meaning relative to a given address context--the address context specifies the physical address to which the virtual address maps. Why can the pointer e be dereferenced both before and after the addressing switch?
  2. Whenever the kernel switches from one environment to another, it must ensure the old environment's registers are saved so they can be restored properly later. Why? Where does this happen?

Challenge 2! (5 points) Add a less trivial scheduling policy to the kernel, such as a fixed-priority scheduler that allows each environment to be assigned a priority and ensures that higher-priority environments are always chosen in preference to lower-priority environments. If you're feeling really adventurous, try implementing a Unix-style adjustable-priority scheduler or even a lottery or stride scheduler. (Look up "lottery scheduling" and "stride scheduling" in Google.)

Write a test program or two that verifies that your scheduling algorithm is working correctly (i.e., the right environments get run in the right order). It may be easier to write these test programs once you have implemented fork() and IPC in parts B and C of this lab.

Challenge 3! (5 points) The JOS kernel currently does not allow applications to use the x86 processor's x87 floating-point unit (FPU), MMX instructions, or Streaming SIMD Extensions (SSE). Extend the Env structure to provide a save area for the processor's floating point state, and extend the context switching code to save and restore this state properly when switching from one environment to another. The FXSAVE and FXRSTOR instructions may be useful, but note that these are not in the old i386 user's manual because they were introduced in more recent processors. Write a user-level test program that does something cool with floating-point.

System Calls for Environment Creation

Although your kernel is now capable of running and switching between multiple user-level environments, it is still limited to running environments that the kernel initially set up. You will now implement the necessary JOS system calls to allow user environments to create and start other new user environments.

Unix provides the fork() system call as its process creation primitive. Unix fork() copies the entire address space of calling process (the parent) to create a new process (the child). The only differences between the two observable from user space are their process IDs and parent process IDs (as returned by getpid and getppid). In the parent, fork() returns the child's process ID, while in the child, fork() returns 0. By default, each process gets its own private address space, and neither process's modifications to memory are visible to the other.

You will provide a different, more primitive set of JOS system calls for creating new user-mode environments. With these system calls you will be able to implement a Unix-like fork() entirely in user space, in addition to other styles of environment creation. The new system calls you will write for JOS are as follows:

This system call creates a new environment with an almost blank slate: nothing is mapped in the user portion of its address space, and it is not runnable. The new environment will have the same register state as the parent environment at the time of the sys_exofork call. In the parent, sys_exofork will return the envid_t of the newly created environment (or a negative error code if the environment allocation failed). In the child, however, it will return 0. (Since the child starts out marked as not runnable, sys_exofork will not actually return in the child until the parent has explicitly allowed this by marking the child runnable using....)
Sets the status of a specified environment to ENV_RUNNABLE or ENV_NOT_RUNNABLE. This system call is typically used to mark a new environment ready to run, once its address space and register state has been fully initialized.
Allocates a page of physical memory and maps it at a given virtual address in a given environment's address space.
Copy a page mapping (not the contents of a page!) from one environment's address space to another, leaving a memory sharing arrangement in place so that the new and the old mappings both refer to the same page of physical memory.
Unmap a page mapped at a given virtual address in a given environment.

For all of the system calls above that accept environment IDs, the JOS kernel supports the convention that a value of 0 means "the current environment." This convention is implemented by envid2env() in kern/env.c.

We have provided a very primitive implementation of a Unix-like fork() in the test program user/dumbfork.c. This test program uses the above system calls to create and run a child environment with a copy of its own address space. The two environments then switch back and forth using sys_yield as in the previous exercise. The parent exits after 10 iterations, whereas the child exits after 20.

Exercise 7. Implement the system calls described above in kern/syscall.c. You will need to use various functions in kern/pmap.c and kern/env.c, particularly envid2env(). For now, whenever you call envid2env(), pass 1 in the checkperm parameter. Be sure you check for any invalid system call arguments, returning -E_INVAL in that case. Test your JOS kernel with user/dumbfork and make sure it works before proceeding.

Challenge 4! (5 points) Add the additional system calls necessary to read all of the vital state of an existing environment as well as set it up. Then implement a user mode program that forks off a child environment, runs it for a while (e.g., a few iterations of sys_yield()), then takes a complete snapshot or checkpoint of the child environment, runs the child for a while longer, and finally restores the child environment to the state it was in at the checkpoint and continues it from there. Thus, you are effectively "replaying" the execution of the child environment from an intermediate state. Make the child environment perform some interaction with the user using sys_cgetc() or readline() so that the user can view and mutate its internal state, and verify that with your checkpoint/restart you can give the child environment a case of selective amnesia, making it "forget" everything that happened beyond a certain point.

This completes Part A of the lab; check it using make grade. If you are trying to figure out why a particular test case is failing, run sh -v, which will show you the output of the kernel builds and QEMU runs for each test, until a test fails. When a test fails, the script will stop, and then you can inspect jos.out to see what the kernel actually printed.

Part B: Copy-on-Write Fork

As mentioned earlier, Unix provides the fork() system call as its primary process creation primitive. The fork() system call copies the address space of the calling process (the parent) to create a new process (the child).

xv6 Unix implements fork() by copying the parent's entire data segment into a new memory region allocated for the child. This is essentially the same approach that dumbfork() takes. The copying of the parent's address into the child is the most expensive part of the fork() operation.

However, a call to fork() is frequently followed almost immediately by a call to exec() in the child process, which replaces the child's memory with a new program. This is what the the shell typically does, for example. In this case, the time spent copying the parent's address space is largely wasted, because the child process will use very little of its memory before calling exec().

For this reason, later versions of Unix took advantage of virtual memory hardware to allow the parent and child to share the memory mapped into their respective address spaces until one of the processes actually modifies it. This technique is known as copy-on-write. To do this, on fork() the kernel would copy the address space mappings from the parent to the child instead of the contents of the mapped pages, and at the same time mark the now-shared pages read-only. When one of the two processes tries to write to one of these shared pages, the process takes a page fault. At this point, the Unix kernel realizes that the page was really a "virtual" or "copy-on-write" copy, and so it makes a new, private copy of the page for the faulting process. In this way, the contents of individual pages aren't actually copied until they are actually written to. This optimization makes a fork() followed by an exec() in the child much cheaper: the child will probably only need to copy one page (the current page of its stack) before it calls exec().

In the next piece of this lab, you will implement a "proper" Unix-like fork() with copy-on-write, as a user space library routine. Implementing fork() and copy-on-write support in user space has the benefit that the kernel remains much simpler and thus more likely to be correct. It also lets individual user-mode programs define their own semantics for fork(). A program that wants a slightly different implementation (for example, the expensive always-copy version like dumbfork(), or one in which the parent and child actually share memory afterward) can easily provide its own.

User-level page fault handling

A user-level copy-on-write fork() needs to know about page faults on write-protected pages, so that's what you'll implement first. Copy-on-write is only one of many possible uses for user-level page fault handling.

It's common to set up an address space so that page faults indicate when some action needs to take place. For example, most Unix kernels initially map only a single page in a new process's stack region, and allocate and map additional stack pages later "on demand" as the process's stack consumption increases and causes page faults on stack addresses that are not yet mapped. A typical Unix kernel must keep track of what action to take when a page fault occurs in each region of a process's space. For example, a fault in the stack region will typically allocate and map new page of physical memory. A fault in the program's BSS region will typically allocate a new page, fill it with zeroes, and map it. In systems with demand-paged executables, a fault in the text region will read the corresponding page of the binary off of disk and then map it.

This is a lot of information for the kernel to keep track of. Instead of taking the traditional Unix approach, you will decide what to do about each page fault in user space, where bugs are less damaging. This design has the added benefit of allowing programs great flexibility in defining their memory regions; you'll use user-level page fault handling later for mapping and accessing files on a disk-based file system.

Setting the Page Fault Handler

In order to handle its own page faults, a user environment will need to register a page fault handler entrypoint with the JOS kernel. The user environment registers its page fault entrypoint via the new sys_env_set_pgfault_upcall system call. We have added a new member to the Env structure, env_pgfault_upcall, to record this information.

Exercise 8. Implement the sys_env_set_pgfault_upcall system call. Be sure to enable permission checking when looking up the environment ID of the target environment, since this is a "dangerous" system call.

Normal and Exception Stacks in User Environments

During normal execution, a user environment in JOS will run on the normal user stack: its RSP register starts out pointing at USTACKTOP, and the stack data it pushes resides on the page between USTACKTOP-PGSIZE and USTACKTOP-1 inclusive. When a page fault occurs in user mode, however, the kernel will restart the user environment running a designated user-level page fault handler on a different stack, namely the user exception stack. In essence, we will make the JOS kernel implement automatic "stack switching" on behalf of the user environment, in much the same way that the x86 processor already implements stack switching on behalf of JOS when transferring from user mode to kernel mode!

The JOS user exception stack is also one page in size, and its top is defined to be at virtual address UXSTACKTOP, so the valid bytes of the user exception stack are from UXSTACKTOP-PGSIZE through UXSTACKTOP-1 inclusive. While running on this exception stack, the user-level page fault handler can use JOS's regular system calls to map new pages or adjust mappings so as to fix whatever problem originally caused the page fault. Then the user-level page fault handler returns, via an assembly language stub, to the faulting code on the original stack.

Each user environment that wants to support user-level page fault handling will need to allocate memory for its own exception stack, using the sys_page_alloc() system call introduced in part A.

Invoking the User Page Fault Handler

You will now need to change the page fault handling code in kern/trap.c to handle page faults from user mode as follows. We will call the state of the user environment at the time of the fault the trap-time state.

If there is no page fault handler registered, the JOS kernel destroys the user environment with a message as before. Otherwise, the kernel sets up a trap frame on the exception stack that looks like a struct UTrapframe from inc/trap.h:

                    <-- UXSTACKTOP
trap-time rsp
trap-time eflags
trap-time rip
trap-time r15       start of struct PushRegs
trap-time r14
trap-time r13
trap-time r12
trap-time r11
trap-time r10
trap-time r9
trap-time rax       end of struct PushRegs
tf_err (error code)
fault_va            <-- %rsp when handler is run

The kernel then arranges for the user environment to resume execution with the page fault handler running on the exception stack with this stack frame; you must figure out how to make this happen. The fault_va is the virtual address that caused the page fault.

If the user environment is already running on the user exception stack when an exception occurs, then the page fault handler itself has faulted. In this case, you should start the new stack frame just under the current tf->tf_rsp rather than at UXSTACKTOP. You should first push an empty 64-bit word, then a struct UTrapframe.

To test whether tf->tf_rsp is already on the user exception stack, check whether it is in the range between UXSTACKTOP-PGSIZE and UXSTACKTOP-1, inclusive.

Exercise 9. Implement the code in kern/trap.c required to dispatch page faults to the user-mode handler. Be sure to take appropriate precautions when writing into the exception stack. (What happens if the user environment runs out of space on the exception stack?)

User-mode Page Fault Entrypoint

Next, you need to implement the assembly routine that will take care of calling the C page fault handler and resume execution at the original faulting instruction. This assembly routine is the handler that will be registered with the kernel using sys_env_set_pgfault_upcall().

Exercise 10. Implement the _pgfault_upcall routine in lib/pfentry.S. The interesting part is returning to the original point in the user code that caused the page fault. You'll return directly there, without going back through the kernel. The hard part is simultaneously switching stacks and re-loading the RIP.

Finally, you need to implement the C user library side of the user-level page fault handling mechanism.

Exercise 11. Finish set_pgfault_handler() in lib/pgfault.c.


Change kern/init.c to run user/faultread. Build your kernel and run it. You should see:

[00000000] new env 00001008
[00001008] user fault va 00000000 ip 0080003a
TRAP frame ...
[00001008] free env 00001008

Change kern/init.c to run user/faultdie. Build your kernel and run it. You should see:

[00000000] new env 00001008
i faulted at va deadbeef, err 6
[00001008] exiting gracefully
[00001008] free env 00001008

Change kern/init.c to run user/faultalloc. Build your kernel and run it. You should see:

[00000000] new env 00001008
fault deadbeef
this string was faulted in at deadbeef
fault cafebffe
fault cafec000
this string was faulted in at cafebffe
[00001008] exiting gracefully
[00001008] free env 00001008

If you see only the first "this string" line, it means you are not handling recursive page faults properly.

Change kern/init.c to run user/faultallocbad. Build your kernel and run it. You should see:

[00000000] new env 00001008
[00001008] user_mem_check assertion failure for va deadbeef
[00001008] free env 00001008

Make sure you understand why user/faultalloc and user/faultallocbad behave differently.

Challenge 5! (5 points) Extend your kernel so that not only page faults, but all types of processor exceptions that code running in user space can generate, can be redirected to a user-mode exception handler. Write user-mode test programs to test user-mode handling of various exceptions such as divide-by-zero, general protection fault, and illegal opcode.

Implementing Copy-on-Write Fork

You now have the kernel facilities to implement copy-on-write fork() entirely in user space.

We have provided a skeleton for your fork() in lib/fork.c. Like dumbfork(), fork() creates a new environment, then scans through the parent environment's entire address space and sets up corresponding page mappings in the child. The key difference is that, while dumbfork() copied pages, fork() will initially only copy page mappings. fork() will copy each page only when one of the environments tries to write it.

The basic control flow for fork() is as follows:

  1. The parent installs pgfault() as the C-level page fault handler, using the set_pgfault_handler() function you implemented above.
  2. The parent calls sys_exofork() to create a child environment.
  3. For each writable or copy-on-write page in its address space below UTOP, the parent calls duppage, which should map the page copy-on-write into the address space of the child and then remap the page copy-on-write in its own address space. duppage sets both PTEs so that the page is not writeable, and to contain PTE_COW in the "avail" field to distinguish copy-on-write pages from genuine read-only pages.

    The exception stack is not remapped this way, however. Instead you need to allocate a fresh page in the child for the exception stack. Since the page fault handler will be doing the actual copying and the page fault handler runs on the exception stack, the exception stack cannot be made copy-on-write: who would copy it?

    fork() also needs to handle pages that are present, but not writable or copy-on-write.

  4. The parent sets the user page fault entrypoint for the child to look like its own.
  5. The child is now ready to run, so the parent marks it runnable.

Each time one of the environments writes a copy-on-write page that it hasn't yet written, it will take a page fault. Here's the control flow for the user page fault handler:

  1. Kernel propagates page fault to _pgfault_upcall, which calls fork()'s pgfault() handler.
  2. pgfault() checks that the fault is a write (check FEC_WR) and that the PTE for the page is marked PTE_COW. If not, panic.
  3. pgfault() allocates a new page mapped at a temporary location and copies the contents of the faulting page contents into it. Then the fault handler maps the new page at the appropriate address with read/write permissions, in place of the old read-only mapping.

Exercise 12. Implement fork, duppage and pgfault in lib/fork.c.

Test your code with the forktree program. It should produce the following messages, with interspersed 'new env', 'free env', and 'exiting gracefully' messages. The messages may not appear in this order, and the environment IDs may be different.

	1008: I am ''
	1009: I am '0'
	2008: I am '00'
	2009: I am '000'
	100a: I am '1'
	3008: I am '11'
	3009: I am '10'
	200a: I am '110'
	4008: I am '100'
	100b: I am '01'
	5008: I am '011'
	4009: I am '010'
	100c: I am '001'
	100d: I am '111'
	100e: I am '101'

Challenge 6! (5 points) Implement a shared-memory fork() called sfork(). This version should have the parent and child share all their memory pages (so writes in one environment appear in the other) except for pages in the stack area, which should be treated in the usual copy-on-write manner. Modify user/forktree.c to use sfork() instead of regular fork(). Also, once you have finished implementing IPC in part C, use your sfork() to run user/pingpongs. You will have to find a new way to provide the functionality of the global env pointer.

Challenge 7! (5 points) Your implementation of fork makes a huge number of system calls. On the x86, switching into the kernel has non-trivial cost. Augment the system call interface so that it is possible to send a batch of system calls at once. Then change fork to use this interface.

How much faster is your new fork?

You can answer this (roughly) by using analytical arguments to estimate how much of an improvement batching system calls will make to the performance of your fork: How expensive is an int 0x30 instruction? How many times do you execute int 0x30 in your fork? Is accessing the TSS stack switch also expensive? And so on...

Alternatively, you can boot your kernel on real hardware and really benchmark your code. See the RDTSC (read time-stamp counter) instruction, defined in the IA32 manual, which counts the number of clock cycles that have elapsed since the last processor reset. QEMU doesn't emulate this instruction faithfully (it can either count the number of virtual instructions executed or use the host TSC, neither of which reflects the number of cycles a real CPU would require).

This ends part B. As usual, you can grade your submission with make grade.

Part C: Preemptive Multitasking and Inter-Process communication (IPC)

In the final part of lab 4 you will modify the kernel to preempt uncooperative environments and to allow environments to pass messages to each other explicitly.

Clock Interrupts and Preemption

Modify kern/init.c to run the user/spin test program. This test program forks off a child environment, which simply spins forever in a tight loop once it receives control of the CPU. Neither the parent environment nor the kernel ever regains the CPU. This is obviously not an ideal situation in terms of protecting the system from bugs or malicious code in user-mode environments, because any user-mode environment can bring the whole system to a halt simply by getting into an infinite loop and never giving back the CPU. In order to allow the kernel to preempt a running environment, forcibly retaking control of the CPU from it, we must extend the JOS kernel to support external hardware interrupts from the clock hardware.

Interrupt discipline

External interrupts (i.e., device interrupts) are referred to as IRQs. There are 16 possible IRQs, numbered 0 through 15. The mapping from IRQ number to IDT entry is not fixed. Pic_init in picirq.c maps IRQs 0-15 to IDT entries IRQ_OFFSET through IRQ_OFFSET+15.

In kern/picirq.h, IRQ_OFFSET is defined to be decimal 32. Thus the IDT entries 32-47 correspond to the IRQs 0-15. For example, the clock interrupt is IRQ 0. Thus, IDT[IRQ_OFFSET+0] (i.e., IDT[32]) contains the address of the clock's interrupt handler routine in the kernel. This IRQ_OFFSET is chosen so that the device interrupts do not overlap with the processor exceptions, which could obviously cause confusion. (In fact, in the early days of PCs running MS-DOS, the IRQ_OFFSET effectively was zero, which indeed caused massive confusion between handling hardware interrupts and handling processor exceptions!)

In JOS external device interrupts are always disabled when in the kernel (and enabled when in user space). External interrupts are controlled by the FL_IF flag bit of the %eflags register (see inc/mmu.h). When this bit is set, external interrupts are enabled. While the bit can be modified in several ways, because of our simplification, we will handle it solely through the process of saving and restoring the %eflags register as we enter and leave user mode.

You will have to ensure that the FL_IF flag is set in user environments when they run so that when an interrupt arrives, it gets passed through to the processor and handled by your interrupt code. Otherwise, interrupts are masked, or ignored until interrupts are re-enabled. Interrupts are masked by default after processor reset, and so far we have never gotten around to enabling them.

Exercise 13. Modify kern/trapentry.S and kern/trap.c to initialize the appropriate entries in the IDT and provide handlers for IRQs 0 through 15. Then modify the code in env_alloc() in kern/env.c to ensure that user environments are always run with interrupts enabled.

The processor never pushes an error code or checks the Descriptor Privilege Level (DPL) of the IDT entry when invoking a hardware interrupt handler. You might want to re-read section 9.2 of the 80386 Reference Manual, or section 5.8 of the IA-32 Intel Architecture Software Developer's Manual, Volume 3, at this time.

After doing this exercise, if you run your kernel with any test program that runs for a non-trivial length of time (e.g., spin), you should see the kernel print trap frames for hardware interrupts. While interrupts are now enabled in the processor, JOS isn't yet handling them, so you should see it misattribute each interrupt to the currently running user environment and destroy it. Eventually it should run out of environments to destroy and drop into the monitor. If you see an infinite cascade of hardware interrupts, you're probably running with interrupts enabled in the kernel and you should fix this before proceeding.

Handling Clock Interrupts

In the user/spin program, after the child environment was first run, it just spun in a loop, and the kernel never got control back. We need to program the hardware to generate clock interrupts periodically, which will force control back to the kernel where we can switch control to a different user environment.

The calls to lapic_init and pic_init (from i386_init in init.c), which we have written for you, set up the clock and the interrupt controller to generate interrupts. You now need to write the code to handle these interrupts.

Exercise 14. Modify the kernel's trap_dispatch() function so that it calls sched_yield() to find and run a different environment whenever a clock interrupt takes place.

You should now be able to get the user/spin test to work: the parent environment should fork off the child, sys_yield() to it a couple times but in each case regain control of the CPU after one time slice, and finally kill the child environment and terminate gracefully.

This is a great time to do some regression testing. Make sure that you haven't broken any earlier part of that lab that used to work (e.g. forktree) by enabling interrupts. Also, try running with multiple CPUs using make CPUS=2 target. You should also be able to pass stresssched now. Run make grade to see for sure. You should now get a total score of 65/75 points on this lab.

Inter-Process communication (IPC)

(Technically in JOS this is "inter-environment communication" or "IEC", but everyone else calls it IPC, so we'll use the standard term.)

We've been focusing on the isolation aspects of the operating system, the ways it provides the illusion that each program has a machine all to itself. Another important service of an operating system is to allow programs to communicate with each other when they want to. It can be quite powerful to let programs interact with other programs. The Unix pipe model is the canonical example.

There are many models for interprocess communication. Even today there are still debates about which models are best. We won't get into that debate. Instead, we'll implement a simple IPC mechanism and then try it out.


You will implement a few additional JOS kernel system calls that collectively provide a simple interprocess communication mechanism. You will implement two system calls, sys_ipc_recv and sys_ipc_try_send. Then you will implement two library wrappers ipc_recv and ipc_send.

The "messages" that user environments can send to each other using JOS's IPC mechanism consist of two components: a single 32-bit value, and optionally a single page mapping. Allowing environments to pass page mappings in messages provides an efficient way to transfer more data than will fit into a single 32-bit integer, and also allows environments to set up shared memory arrangements easily.

Sending and Receiving Messages

To receive a message, an environment calls sys_ipc_recv. This system call de-schedules the current environment and does not run it again until a message has been received. When an environment is waiting to receive a message, any other environment can send it a message - not just a particular environment, and not just environments that have a parent/child arrangement with the receiving environment. In other words, the permission checking that you implemented in Part A will not apply to IPC, because the IPC system calls are carefully designed so as to be "safe": an environment cannot cause another environment to malfunction simply by sending it messages (unless the target environment is also buggy).

To try to send a value, an environment calls sys_ipc_try_send with both the receiver's environment id and the value to be sent. If the named environment is actually receiving (it has called sys_ipc_recv and not gotten a value yet), then the send delivers the message and returns 0. Otherwise the send returns -E_IPC_NOT_RECV to indicate that the target environment is not currently expecting to receive a value. (Other errors are possible too; see the comments in the source files.)

A library function ipc_recv in user space will take care of calling sys_ipc_recv and then looking up the information about the received values in the current environment's struct Env.

Similarly, a library function ipc_send will take care of repeatedly calling sys_ipc_try_send until the send succeeds.

Transferring Pages

When an environment calls sys_ipc_recv with a dstva parameter in the user address space, the environment is stating that it is willing to receive a page mapping. If the sender sends a page, then that page should be mapped at dstva in the receiver's address space. If the receiver already had a page mapped at dstva, then that previous page is unmapped.

When an environment calls sys_ipc_try_send with a srcva parameter in the user address space, it means the sender wants to send the page currently mapped at srcva to the receiver, with permissions perm. After a successful IPC, the sender keeps its original mapping for the page at srcva in its address space, but the receiver also obtains a mapping for this same physical page at the dstva originally specified by the receiver, in the receiver's address space. As a result this page becomes shared between the sender and receiver.

If either the sender or the receiver does not indicate that a page should be transferred, then no page is transferred. After any IPC the kernel sets the new field env_ipc_perm in the receiver's Env structure to the permissions of the page received, or zero if no page was received.

Implementing IPC

Exercise 15. Implement sys_ipc_recv and sys_ipc_try_send in kern/syscall.c. Read the comments on both before implementing them, since they have to work together. When you call envid2env in these routines, you should set the checkperm flag to 0, meaning that any environment is allowed to send IPC messages to any other environment, and the kernel does no special permission checking other than verifying that the target envid is valid.

Then implement the ipc_recv and ipc_send functions in lib/ipc.c.

Use the user/sendpage, user/pingpong, and user/primes functions to test your IPC mechanism. You might find it interesting to read user/primes.c to see all the forking and IPC going on behind the scenes.

Challenge 8! (5 points) Why does ipc_send have to loop? Change the system call interface so it doesn't have to. Make sure you can handle multiple environments trying to send to one environment at the same time.

Challenge 9! (5 points) The prime sieve is only one neat use of message passing between a large number of concurrent programs. Read C. A. R. Hoare, ``Communicating Sequential Processes,'' Communications of the ACM 21(8) (August 1978), 666-667, and implement the matrix multiplication example.

Challenge 10! (5 points) Probably the most impressive example of the power of message passing is Doug McIlroy's power series calculator, described in M. Douglas McIlroy, ``Squinting at Power Series,'' Software--Practice and Experience, 20(7) (July 1990), 661-683. Implement his power series calculator and compute the power series for sin(x+x^3).

Challenge 11! (5 points) Make JOS's IPC mechanism more efficient by applying some of the techniques from Liedtke's paper, "Improving IPC by Kernel Design", or any other tricks you may think of. Feel free to modify the kernel's system call API for this purpose, as long as your code is backwards compatible with what our grading scripts expect.

This ends part C. As usual, you can grade your submission with make grade. If you are trying to figure out why a particular test case is failing, run sh -v, which will show you the output of the kernel builds and QEMU runs for each test, until a test fails. When a test fails, the script will stop, and then you can inspect jos.out to see what the kernel actually printed.

As with prior labs, you need to create a file in the top-level directory of your code named gitinfo.txt. This file should have precisely two lines: one with the repository name, and one with the branch you wish to submit. For example, if your team repo is jos-dontest and you are submitting the lab4 branch, your gitinfo.txt file should look like ths:

Make sure you add and push this file to github.

Then, you will go to gradescope for the lab assignment, and submit via github. After a few minutes, you should be able to see the results of the autograder and confirm it matches what you expect. Let course staff know ASAP if there is an issue.

Last updated: 2020-03-23 15:05:08 -0400 [validate xhtml]