Code: 0x0001
Description: The module has been successfully booted. (Information message
Note: Is triggered upon a complete failure of the logic voltage, after a reboot), or after a restart initiated by the internal ,,WatchDog''. If this message appears frequently during operation, the logic voltage supply should be checked. Ensure that the performance driver is working properly.
 | In this case the code consists of 2 bytes => D-Len > ,,2'' => if only the D-Len byte is queried, the message is not interpreted as an error message. The rule of D-Len == ,,2'' => can thus always be adhered to. |
|
| If the RS232 Silent interface is selected, this message is suppressed. |