Communication Mode

Access rights: User
Description: The active communication system is configured.

• Auto (0x00)
  The communication system is tried to identified and configured automatically. Checked hardware until now.
  
  

  If a module is connected to simultaneously to the RS232 and the Profibus interface, then the Profibus interface (depending on the hardware) will be recognized immediately after the module is switched on. There is no possibility in such cases of communicating via the RS232 interface.

  
  
• RS232 (0x01)
• CAN (0x02)
• Profibus DPV0 (0x03)
• RS232 Silent (0x04)
  Impulse messages deactivated. (inkl. INFO BOOT)

Data: (5 bits) 0 .. 31