Access rights: User
Description: All inputs and outputs of the module use the set unit system.
If the unit system is changed from float ([mm](0x00),[m](0x01),[Inch](0x02),[rad](0x03),[Degree](0x04))
to integer [mum](0x06),[muDegree](0x07),[muInch](0x08)),[Milli-degree](0x09)),
all time and current values are also interpreted as integers => [s] -> [ms]; [A] -> [mA].
The internal unit system is assigned (0x05).
Data: (5 bits) 0 .. 31
 | Please note: Changing the unit system affects a number of EPROM parameters, so that they must be adjusted immediately! |