Brake Usage
Access rights: Profi
Description: Brake usage
- No Use (0x00)
The brake is not used. It is only applied in the event of a power failure. After the module is started, it is automatically released.
- Error Only (0x01)
Brake is only applied after an error occurred. Otherwise, the drive is controlled continuously without braking.
- Normal (0x02)
Brake is automatically applied in the event of a malfunction and at the end of the movement.
If a brake is configured, the pseudo absolute value transmitter is possibly active, when other requirements are fulfilled.
Data: (UInt16) 0 .. 65535