Brake

Serial Number

Access rights: Root
Description: Serial number of the brake.
Data: (UInt32) => 0 .. 4294967296

Type

Access rights: Advanced
Description: Type of brake. The brake voltage is adjusted by means of the software based on the configured motor voltage and the brake type.
Data: (UInt16) 0 .. 65535

Incorrect configuration might result in a brake failure!

Brake Usage

Access rights: Profi
Description: Brake usage

• No Use (0x00)
  The brake is not used. It is only applied in the event of a power failure. After the module is started, it is automatically released.
• Error Only (0x01)
  Brake is only applied after an error occurred. Otherwise, the drive is controlled continuously without braking.
• Normal (0x02)
  Brake is automatically applied in the event of a malfunction and at the end of the movement.

If a brake is configured, the pseudo absolute value transmitter is possibly active, when other requirements are fulfilled.

Data: (UInt16) 0 .. 65535

Timeout

Access rights: Profi
Description: Time required for the brake to generate and release the magnetic field, indicated in [s] or [ms], depending on the unit system.
Data: (Float)