Troubleshooting

An (,,ERROR MOTOR VOLTAGE LOW'') error occurred.

1. Interpret and eliminate error. Power supply to motor switched off => switch on power supply.
2. Acknowledge error with ,,CMD ACK''
3. ,,CMD ACK'' confirmed
4. Information message ,,No other errors'' displayed.
   

	ID	DLC	D-Len	Cmd	Data
alle 15 [s]	0x301	0x03	0x02	0x88	0x74
M->S	0x501	0x02	0x01	0x8B
S->M	0x701	0x04	0x03	0x8B	0x4F 0x4B
Impulse	0x701	0x04	0x03	0x8A	0x08 0x00