MOVE POS 10 [mm]

Default positioning command.

1. Send command for movement to position 10 [mm]
2. Message ,,will reach position in 3.358 [s]''. Movement is started.
3. After some time,,,in position 9.9969 [mm]''
   

	ID	D-Len	Cmd	Data	CRC16
M->S	0x05 0x01	0x05	0xB0	0x00 0x00 0x20 0x41	0x48 0x80
S->M	0x07 0x01	0x05	0xB0	0xEE 0xEE 0x56 0x40	0x7B 0xE4
Impulse	0x07 0x01	0x05	0x94	0xB6 0xF3 0x1F 0x41	0x7E 0xD5