Troubleshooting

An (,,ERROR MOTOR VOLTAGE LOW'') error occurred.

1. Interpret and eliminate error. Power supply to motor switched off => switch on power supply.
2. Acknowledge error with ,,CMD ACK''
3. ,,CMD ACK'' confirmed
4. Information message ,,No other errors'' displayed.
   

	ID	D-Len	Cmd	Data	CRC16
every 15 [s]	0x03 0x01	0x02	0x88	0x74	0x82 0x1B
M->S	0x05 0x01	0x01	0x8B		0x10 0xFB
S->M	0x07 0x01	0x03	0x8B	0x4F 0x4B	0x38 0x1E
Impulse	0x07 0x01	0x03	0x8A	0x08 0x00	0x1A 0x19