SET TARGET TIME (0xA4)

Code: 0xA4
Description: The ,,time'' parameter for the next ,,MOVE POS TIME'' command is now set.
Parameter (master -> slave):

• Time in the configured unit system

Response (slave -> master): ,,OK'' (0x4F4B) ) if successful.
Example:

	D-Len	Cmd	Param
M->S	0x05	0xA4	0x66 0x66 0x96 0x40	Will set time to 4.7 [s]
S->M	0x03	0xA4	0x4F 0x4B

Note: Is applied for the next command ,,MOVE POS TIME'', ,,MOVE POS TIME REL'', ,,MOVE POS TIME LOOP'' or ,,MOVE POS TIME REL LOOP''.