Code: 0x91
Description: The module is slowed down and held in the current position. For modules with configured brake, this brake is applied. Otherwise the module is actively controlled.
Parameter (master -> slave): none
Response (slave -> master): ,,OK'' (0x4F4B) if successful.
Example:
| D-Len | Cmd | Param | ||
| M->S | 0x01 | 0x91 | ||
| S->M | 0x03 | 0x91 | 0x4F 0x4B |
Note: The command might trigger the impulse message ,,CMD MOVE BLOCKED''.